IPS Installation Cost in Bangladesh 2026 — Complete Price Breakdown
IPS Installation Cost in Bangladesh 2026 — Complete Price Breakdown
If you are planning to install an Inverter Power Supply (IPS) system for your home or business in Bangladesh, understanding the total installation cost is crucial. The price varies significantly depending on capacity, battery type, and additional components like solar panels.
This comprehensive guide breaks down every cost component so you can budget accurately for your IPS installation in Bangladesh.
What Affects IPS Installation Cost?
The installation cost of an IPS system depends on several factors:
- System capacity (VA/kVA) — Larger capacity means higher cost
- Battery type — LiFePO4 batteries cost more upfront but last longer
- Brand — HiTHIUM, Luminous, and other brands have different price points
- Solar integration — Adding solar panels increases initial cost but saves electricity bills
- Installation complexity — Wall-mounted vs. floor-standing, single-phase vs. three-phase
- Location — Labor costs vary between Dhaka, Chittagong, and rural areas
IPS Hardware Costs (Bangladesh 2026)
| Product Type | Capacity | Price Range (BDT) | Best For |
|---|---|---|---|
| HiTHIUM HeroEE 1 | 1kWh / 200W | ৳42,800 | Single room backup |
| HiTHIUM HeroEE Light 1 | 1004.8Wh / 500W | ৳57,800 | Small home / apartment |
| HiTHIUM HeroEE 2 | 2kWh / 1000W | ৳88,600 | Medium home / office |
| HiTHIUM MaxPower 8 | 8kWh / 5000W | Contact for price | Large home / business |
| HiTHIUM HeroEE 16 | 16kWh / 11kW | ৳380,300 | Commercial / industrial |
| HiTHIUM HC200 Solar Panel | 200W portable | ৳24,500 | Solar charging add-on |
Installation Labor Costs in Bangladesh
Professional installation is essential for safety and warranty compliance. Here are typical labor costs:
- Simple wall-mount installation: ৳1,500 – ৳3,000
- Floor-standing unit installation: ৳2,500 – ৳5,000
- Solar panel integration: ৳3,000 – ৳8,000 (depending on panel count)
- Electrical wiring & distribution board setup: ৳5,000 – ৳15,000
- Three-phase commercial installation: ৳10,000 – ৳25,000
Installation costs in Dhaka tend to be 10-15% higher than in other cities due to labor rates and transportation.
Additional Components Cost
Beyond the IPS unit and installation, you may need these additional components:
| Component | Purpose | Estimated Cost (BDT) |
|---|---|---|
| Cable & Wiring Set | Power transmission from IPS to loads | ৳2,000 – ৳8,000 |
| Distribution Board (DB) | Load distribution and circuit protection | ৳3,000 – ৳10,000 |
| Surge Protector | Protects against voltage spikes | ৳1,500 – ৳4,000 |
| Battery Connections (Bus Bar) | Safe battery interconnection | ৳1,000 – ৳3,000 |
| Solar Charge Controller | Regulates solar panel charging | ৳3,000 – ৳12,000 |
Total Installation Cost Examples
Example 1: Small Apartment (Dhaka)
- HiTHIUM HeroEE Light 1: ৳57,800
- Installation labor: ৳2,500
- Basic wiring & DB: ৳5,000
- Total: ~৳65,300
This setup powers fans, lights, and a laptop for 4-6 hours during load shedding.
Example 2: Medium Home (Chittagong)
- HiTHIUM HeroEE 2: ৳88,600
- Installation labor: ৳3,500
- Wiring & distribution board: ৳8,000
- Surge protector: ৳2,000
- Total: ~৳102,100
This setup handles multiple rooms with TVs, fans, and refrigerator backup.
Example 3: Home with Solar Integration
- HiTHIUM HeroEE 2: ৳88,600
- HiTHIUM HC200 Solar Panel: ৳24,500
- Solar integration installation: ৳6,000
- Full wiring & protection: ৳10,000
- Total: ~৳129,100
Solar integration reduces monthly electricity costs by 30-50% while providing backup power.
LiFePO4 vs Tubular Battery IPS — Cost Comparison
| Factor | LiFePO4 IPS | Tubular Battery IPS |
|---|---|---|
| Initial Cost | Higher (৳50,000-৳150,000) | Lower (৳25,000-৳80,000) |
| Lifespan | 10-15 years (11,000+ cycles) | 3-5 years (500-1000 cycles) |
| Battery Replacement | Once in 10+ years | Every 3-4 years |
| Monthly Maintenance | Minimal | Regular water topping |
| Total 10-Year Cost | Lower | Higher (2-3 replacements) |
While LiFePO4 lithium IPS costs more upfront, the total cost of ownership over 10 years is typically 30-40% lower than tubular battery systems.
Tips to Reduce IPS Installation Cost
- Choose right capacity — Don’t oversize; calculate your actual load requirements
- Buy during festivals — Eid and Puja seasons often have discounts
- Bundle with solar — Solar-ready IPS units save on separate charge controller cost
- Get multiple quotes — Compare prices from HiTHIUM, Luminous, and local dealers
- Install during construction — Easier and cheaper if done before interior work
- Maintain properly — Regular cleaning extends battery life and reduces replacement costs
Why Choose HiTHIUM for IPS Installation?
HiTHIUM Bangladesh offers premium lithium IPS systems with several advantages:
- 11,000+ cycle lifespan — Lasts 10+ years with proper maintenance
- Solar-ready designs — Most models support direct solar charging
- Smart monitoring — WiFi-enabled models allow remote monitoring via phone app
- Bangladesh-wide service — Installation and after-sales support across major cities
- 5-year warranty — Industry-leading warranty on lithium batteries
Visit our product catalog to explore all available IPS models and contact us for a customized quote based on your specific requirements.
Frequently Asked Questions
Q: What is the average IPS installation cost for a 3-bedroom home in Bangladesh?
A: For a 3-bedroom home, a 2-3kWh lithium IPS system including installation typically costs between ৳100,000 and ৳150,000. This covers the IPS unit, professional installation, basic wiring, and surge protection.
Q: Does IPS installation cost include battery replacement?
A: No, the quoted installation cost typically includes only the IPS unit and labor. Battery replacement is a separate expense that comes every 3-5 years for tubular batteries or once in 10+ years for LiFePO4 lithium batteries.
Q: How much does adding solar panels cost to an IPS system?
A: Adding a 200W solar panel to your IPS system costs approximately ৳24,500 for the panel plus ৳3,000-6,000 for installation. Solar-ready IPS models eliminate the need for a separate charge controller.
Q: Is professional IPS installation necessary?
A: Yes, professional installation ensures safe electrical connections, proper grounding, and compliance with local electrical codes. DIY installation may void warranties and create safety hazards.
Q: What is the runtime of a 1kWh IPS system during load shedding?
A: A 1kWh IPS system can power 3-4 fans (80W each) for approximately 3 hours, or LED lights (10W each) for 8-10 hours. Actual runtime depends on total connected load.
Q: Are there government subsidies for IPS installation in Bangladesh?
A: Currently, there are no direct government subsidies for residential IPS systems. However, solar-powered IPS systems may qualify for net metering benefits under certain conditions. Check with BREB (Bangladesh Rural Electrification Board) for latest policies.
